Coffee Machine Drip Tray Grate
Drip tray grates and tank lids for bench-top coffee machines. Water-contact-adjacent, printed in easy-clean PETG.
Drip tray grates and tank lids for bench-top coffee machines. Water-contact-adjacent, printed in easy-clean PETG.
Common failure: Grate bars snap and cups sit crooked.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Breville and similar |
|---|---|
| Common failure mode | Grate bars snap and cups sit crooked |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Alternative materials | Resin |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–4 hours |
| Estimated cost range | $18 – $40 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
