Coffee Machine Water Tank Lid
Water tank lids and scoops for coffee machines — commonly lost, rarely sold separately.
Water tank lids and scoops for coffee machines — commonly lost, rarely sold separately.
Common failure: Tank lids crack at the hinge or go missing.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | DeLonghi and similar |
|---|---|
| Common failure mode | Tank lids crack at the hinge or go missing |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $15 – $35 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
