Daihatsu Charade Glovebox Hinge Repair
The Daihatsu Charade is a vehicle worth keeping right, and a broken glovebox hinge repair shouldn't be the thing that lets it down. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $25 – $55
- Estimated print time: 2–3 hours
- Final pricing is confirmed by quote.
The Daihatsu Charade is a vehicle worth keeping right, and a broken glovebox hinge repair shouldn't be the thing that lets it down. With your sample on the bench this is a realistic reproduction job.
Why these break
Hinge lugs shear so the glovebox lid drops or falls out. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — twenty years on, there's no margin left in it.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Daihatsu |
|---|---|
| Model | Charade |
| Year range | 1980–2004 |
| Vehicle / equipment type | Passenger vehicle / ute |
| Common failure mode | Hinge lugs shear so the glovebox lid drops or falls out |
| Typical use case | Direct replacement for the original glovebox hinge repair on the Daihatsu Charade. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $25 – $55 |
| Expected lifespan | 5+ years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
