Detroit Charger Wall Bracket
If the charger wall bracket on your Detroit has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. We've made this style of part before and can usually print yours without drama.
If the charger wall bracket on your Detroit has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. We've made this style of part before and can usually print yours without drama.
Why these break
No factory wall mount exists. The factory part is made from styrene-based plastic that loses its plasticisers over the years. It gets glassy, then one warm day it lets go under a load it used to handle easily.
How we reproduce them
These take a proper modelling pass: we measure the mounting points and clip geometry from your part, reinforce the known failure point, and verify fit with a test print before the final run.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Detroit |
|---|---|
| Vehicle / equipment type | Power tool |
| Common failure mode | No factory wall mount exists |
| Typical use case | Direct replacement for the original charger wall bracket on the Detroit. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 3–5 hours |
| Estimated cost range | $25 – $55 |
| Expected lifespan | 4–6 years under clamping load |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
