Detroit Tool Belt Clip
We keep getting asked about this one — the tool belt clip is one of those Detroit parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
We keep getting asked about this one — the tool belt clip is one of those Detroit parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
Why these break
Belt clip snaps at the screw boss. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in PA-CF. Carbon-fibre nylon is the strongest material we run — it goes into parts that carry real load, where a lesser plastic would be the next thing to break.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Detroit |
|---|---|
| Vehicle / equipment type | Power tool |
| Common failure mode | Belt clip snaps at the screw boss |
| Typical use case | Direct replacement for the original tool belt clip on the Detroit. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $15 – $35 |
| Expected lifespan | 5+ years under load |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
