Ducati Instrument Surround
If the instrument surround on your Ducati has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $25 – $55
- Estimated print time: 2–4 hours
- Final pricing is confirmed by quote.
If the instrument surround on your Ducati has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Why these break
Cluster surround cracks from sun and vibration. The factory part is made from styrene-based plastic that loses its plasticisers over the years. It gets glassy, then one warm day it lets go under a load it used to handle easily.
How we reproduce them
These take a proper modelling pass: we measure the mounting points and clip geometry from your part, reinforce the known failure point, and verify fit with a test print before the final run.
We print these in ASA. ASA is the UV-stable cousin of ABS — it holds its colour and strength through years of Australian sun where the original plastic went chalky and brittle.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Ducati |
|---|---|
| Vehicle / equipment type | Motorcycle |
| Common failure mode | Cluster surround cracks from sun and vibration |
| Typical use case | Direct replacement for the original instrument surround on the Ducati. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | ABS |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–4 hours |
| Estimated cost range | $25 – $55 |
| Expected lifespan | 3–5 years in full sun, longer under cover |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
