Haier Rangehood Filter Clip
If the rangehood filter clip on your Haier has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. With your sample on the bench this is a realistic reproduction job.
If the rangehood filter clip on your Haier has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. With your sample on the bench this is a realistic reproduction job.
Why these break
Filter clips fatigue and the mesh filter drops out. Heat cycling is the killer here: years of expanding and contracting work-hardens the plastic until a routine bump becomes the final straw.
How we reproduce them
This is a quick job on our end — we take dimensions from your old part, adjust for print tolerances, and run a small batch so you have spares for next time.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Haier |
|---|---|
| Vehicle / equipment type | Household appliance |
| Common failure mode | Filter clips fatigue and the mesh filter drops out |
| Typical use case | Direct replacement for the original rangehood filter clip on the Haier. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $6 – $14 |
| Expected lifespan | 5+ years in normal use |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
