Harley-Davidson Indicator Stem Base
We keep getting asked about this one — the indicator stem base is one of those Harley-Davidson parts that fails long before the rest of the unit is done. We've made this style of part before and can usually print yours without drama.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $10 – $25
- Estimated print time: 1–2 hours
- Minimum order: 2
- Final pricing is confirmed by quote.
We keep getting asked about this one — the indicator stem base is one of those Harley-Davidson parts that fails long before the rest of the unit is done. We've made this style of part before and can usually print yours without drama.
Why these break
Indicator stems snap at the base in tip-overs. Vibration fatigue does the damage: thousands of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Harley-Davidson |
|---|---|
| Vehicle / equipment type | Motorcycle |
| Common failure mode | Indicator stems snap at the base in tip-overs |
| Typical use case | Direct replacement for the original indicator stem base on the Harley-Davidson. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | TPU |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $25 |
| Expected lifespan | 4–6 years in cabin conditions |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
