Holden Commodore VE Glovebox Hinge
Reinforced replacement for the notoriously weak VE glovebox hinge. We redesign the lug profile so the repair is stronger than the original.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $25 – $60
- Estimated print time: 2–3 hours
- Final pricing is confirmed by quote.
Reinforced replacement for the notoriously weak VE glovebox hinge. We redesign the lug profile so the repair is stronger than the original.
Common failure: Hinge lugs shear off so the glovebox lid drops or falls out.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Holden |
|---|---|
| Model | Commodore VE |
| Year range | 2006–2013 |
| Common failure mode | Hinge lugs shear off so the glovebox lid drops or falls out |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $25 – $60 |
| Expected lifespan | 3–5 years typical |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
