Jeep Wrangler TJ Soft Top Retainer Clip
Soft top bow retainer clip for TJ Wranglers, printed in UV-stable ASA. Cheaper than importing and usually stronger than the 20-year-old originals.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $12 – $30
- Estimated print time: 1–2 hours
- Minimum order: 2
- Final pricing is confirmed by quote.
Soft top bow retainer clip for TJ Wranglers, printed in UV-stable ASA. Cheaper than importing and usually stronger than the 20-year-old originals.
Common failure: Clips crack from UV exposure and cold weather.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Jeep |
|---|---|
| Model | Wrangler TJ |
| Year range | 1997–2006 |
| Common failure mode | Clips crack from UV exposure and cold weather |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $30 |
| Expected lifespan | 2–4 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
