Kawasaki Fairing Tab Repair
Kawasaki made solid gear, but the small plastics are always the first to go — and the fairing tab repair is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $35 – $80
- Estimated print time: 2–4 hours
- Final pricing is confirmed by quote.
Kawasaki made solid gear, but the small plastics are always the first to go — and the fairing tab repair is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Fairing mounting tabs snap in drops and tip-overs. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
Complex geometry means we treat this as a small engineering project — scan, model, test print, refine. We'll quote before any work starts so there are no surprises.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Kawasaki |
|---|---|
| Vehicle / equipment type | Motorcycle |
| Common failure mode | Fairing mounting tabs snap in drops and tip-overs |
| Typical use case | Direct replacement for the original fairing tab repair on the Kawasaki. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Hard |
| Estimated print time | 2–4 hours |
| Estimated cost range | $35 – $80 |
| Expected lifespan | 4–6 years in cabin conditions |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
