Kia Stinger Glovebox Hinge Repair
Wreckers are drying up for the Kia Stinger, and when they do have one, its glovebox hinge repair is usually just as brittle as yours. Printing a fresh one solves that. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $25 – $55
- Estimated print time: 2–3 hours
- Final pricing is confirmed by quote.
Wreckers are drying up for the Kia Stinger, and when they do have one, its glovebox hinge repair is usually just as brittle as yours. Printing a fresh one solves that. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Why these break
Hinge lugs shear so the glovebox lid drops or falls out. The factory part is made from styrene-based plastic that loses its plasticisers over the years. It gets glassy, then one warm day it lets go under a load it used to handle easily.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Kia |
|---|---|
| Model | Stinger |
| Year range | 2017–2023 |
| Vehicle / equipment type | Passenger vehicle / ute |
| Common failure mode | Hinge lugs shear so the glovebox lid drops or falls out |
| Typical use case | Direct replacement for the original glovebox hinge repair on the Kia Stinger. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $25 – $55 |
| Expected lifespan | 4–6 years under clamping load |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
