Nintendo Cartridge Shell
Nintendo made solid gear, but the small plastics are always the first to go — and the cartridge shell is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $12 – $28
- Estimated print time: 2–3 hours
- Final pricing is confirmed by quote.
Nintendo made solid gear, but the small plastics are always the first to go — and the cartridge shell is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Cartridge shells crack at the corners and screw posts. Heat cycling is the killer here: years of expanding and contracting work-hardens the plastic until a routine bump becomes the final straw.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles everyday warmth without complaint.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Nintendo |
|---|---|
| Vehicle / equipment type | Retro console |
| Common failure mode | Cartridge shells crack at the corners and screw posts |
| Typical use case | Replacement part for retro console. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $12 – $28 |
| Expected lifespan | 5+ years indoors |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
