Number Plate Light Housing
Number plate light housings and lens retainers. We reuse your lens and globe holder where possible.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $12 – $30
- Estimated print time: 1–2 hours
- Final pricing is confirmed by quote.
Number plate light housings and lens retainers. We reuse your lens and globe holder where possible.
Common failure: Housing tabs break and the lens hangs by its wires.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Most makes and models |
|---|---|
| Common failure mode | Housing tabs break and the lens hangs by its wires |
| Typical use case | Replacement part for most makes and models. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | ABS |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $30 |
| Expected lifespan | 3–5 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
