Office Chair Base Glide
If your office chair base glide has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
If your office chair base glide has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
Why these break
Glides wear through and castors seize. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — years on, there's no margin left in it.
How we reproduce them
This is a quick job on our end — we take dimensions from your old part, adjust for print tolerances, and run a small batch so you have spares for next time.
We print these in Nylon. Nylon is slippery and fatigue-resistant, which makes it the right choice for parts that pivot, slide or flex thousands of times.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Vehicle / equipment type | Office chairs |
|---|---|
| Common failure mode | Glides wear through and castors seize |
| Typical use case | Replacement part for office chairs. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Nylon |
| Alternative materials | TPU |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $5 – $12 |
| Expected lifespan | 5+ years, even on moving parts |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
