Paramount Blind End Cap
Paramount made solid gear, but the small plastics are always the first to go — and the blind end cap is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Paramount made solid gear, but the small plastics are always the first to go — and the blind end cap is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Roller blind end caps crack and the blind drops. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
The process is simple: drop the part in or send clear photos with a ruler in frame, we confirm fit details, and print replacements — often with a little extra material where the original always cracked.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Paramount |
|---|---|
| Vehicle / equipment type | Caravan / pop-top |
| Common failure mode | Roller blind end caps crack and the blind drops |
| Typical use case | Direct replacement for the original blind end cap on the Paramount. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $6 – $16 |
| Expected lifespan | 5+ years indoors |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
