Primus Table Leg Lock
Primus made solid gear, but the small plastics are always the first to go — and the table leg lock is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Primus made solid gear, but the small plastics are always the first to go — and the table leg lock is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Folding leg locks wear and tables collapse. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Primus |
|---|---|
| Vehicle / equipment type | Camping gear |
| Common failure mode | Folding leg locks wear and tables collapse |
| Typical use case | Replacement part for camping gear. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $24 |
| Expected lifespan | 4–6 years under clamping load |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
