RC Car Battery Tray
Battery trays, mounts and body posts for RC cars — often redesigned stronger than stock for bashers.
Battery trays, mounts and body posts for RC cars — often redesigned stronger than stock for bashers.
Common failure: Tray tabs crack in crashes.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | 1/10 scale RC cars |
|---|---|
| Common failure mode | Tray tabs crack in crashes |
| Typical use case | Replacement part for 1/10 scale RC cars. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $18 – $40 |
| Expected lifespan | Until the next big crash |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
