Royal Enfield Side Cover Grommet Mount
We keep getting asked about this one — the side cover grommet mount is one of those Royal Enfield parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $15 – $35
- Estimated print time: 1–2 hours
- Final pricing is confirmed by quote.
We keep getting asked about this one — the side cover grommet mount is one of those Royal Enfield parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
Why these break
Side cover pegs snap off leaving the cover loose. Vibration fatigue does the damage: thousands of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Royal Enfield |
|---|---|
| Vehicle / equipment type | Motorcycle |
| Common failure mode | Side cover pegs snap off leaving the cover loose |
| Typical use case | Direct replacement for the original side cover grommet mount on the Royal Enfield. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $15 – $35 |
| Expected lifespan | 4–6 years in cabin conditions |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
