Sullage Cap and Keeper
Sullage outlet caps with a tethered keeper strap so the next one doesn't go missing.
Sullage outlet caps with a tethered keeper strap so the next one doesn't go missing.
Common failure: Caps go missing at the dump point.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Standard sullage outlets |
|---|---|
| Common failure mode | Caps go missing at the dump point |
| Typical use case | Replacement part for standard sullage outlets. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | TPU |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $8 – $16 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
