ToolPRO Tool Belt Clip
ToolPRO made solid gear, but the small plastics are always the first to go — and the tool belt clip is a regular on our bench. We've made this style of part before and can usually print yours without drama.
ToolPRO made solid gear, but the small plastics are always the first to go — and the tool belt clip is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Why these break
Belt clip snaps at the screw boss. Heat cycling is the killer here: years of expanding and contracting work-hardens the plastic until a routine bump becomes the final straw.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in PA-CF. Carbon-fibre nylon is the strongest material we run — it goes into parts that carry real load, where a lesser plastic would be the next thing to break.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | ToolPRO |
|---|---|
| Vehicle / equipment type | Power tool |
| Common failure mode | Belt clip snaps at the screw boss |
| Typical use case | Direct replacement for the original tool belt clip on the ToolPRO. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $15 – $35 |
| Expected lifespan | 4–6 years in hard service |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
