Trailer Plug Holder Bracket
Towbar-mounted holders for flat and round trailer plugs — stops the plug dragging on the ground between tows.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $10 – $22
- Estimated print time: 1–2 hours
- Final pricing is confirmed by quote.
Towbar-mounted holders for flat and round trailer plugs — stops the plug dragging on the ground between tows.
Common failure: Plug holder snaps off the towbar tongue.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Standard 7 and 12 pin plugs |
|---|---|
| Common failure mode | Plug holder snaps off the towbar tongue |
| Typical use case | Replacement part for standard 7 and 12 pin plugs. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $22 |
| Expected lifespan | 3–5 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
