Triumph Chain Guard
A broken chain guard shouldn't sideline otherwise good Triumph equipment, and with a decent sample to work from it usually doesn't have to. We've made this style of part before and can usually print yours without drama.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $25 – $60
- Estimated print time: 2–4 hours
- Final pricing is confirmed by quote.
A broken chain guard shouldn't sideline otherwise good Triumph equipment, and with a decent sample to work from it usually doesn't have to. We've made this style of part before and can usually print yours without drama.
Why these break
Chain guard cracks at the mounting holes. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Triumph |
|---|---|
| Vehicle / equipment type | Motorcycle |
| Common failure mode | Chain guard cracks at the mounting holes |
| Typical use case | Direct replacement for the original chain guard on the Triumph. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | ASA |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–4 hours |
| Estimated cost range | $25 – $60 |
| Expected lifespan | 5+ years |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
