Utensil Drawer Divider Clip
If your utensil drawer divider clip has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
If your utensil drawer divider clip has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
Why these break
Divider clips crack and trays slide. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — years on, there's no margin left in it.
How we reproduce them
The process is simple: drop the part in or send clear photos with a ruler in frame, we confirm fit details, and print replacements — often with a little extra material where the original always cracked.
We print these in PETG. PETG has a little give in it, so it snaps into place like the original and shrugs off the knocks that shattered the old part.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Vehicle / equipment type | Kitchen drawers |
|---|---|
| Common failure mode | Divider clips crack and trays slide |
| Typical use case | Replacement part for kitchen drawers. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 15–30 minutes |
| Estimated cost range | $3 – $8 |
| Expected lifespan | 3–5 years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
