Westinghouse Oven Control Knob
Front-panel control knobs for Westinghouse ovens and cooktops. Front knobs run warm, not hot — a good printing candidate, unlike parts inside the oven.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $12 – $25
- Estimated print time: 1–2 hours
- Minimum order: 2
- Final pricing is confirmed by quote.
Front-panel control knobs for Westinghouse ovens and cooktops. Front knobs run warm, not hot — a good printing candidate, unlike parts inside the oven.
Common failure: Knob splits at the D-shaft after years of heat cycling.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Westinghouse |
|---|---|
| Common failure mode | Knob splits at the D-shaft after years of heat cycling |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | Resin |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $25 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
