BMW Motorrad Indicator Stem Base
If the indicator stem base on your BMW Motorrad has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. We've made this style of part before and can usually print yours without drama.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $10 – $25
- Estimated print time: 1–2 hours
- Minimum order: 2
- Final pricing is confirmed by quote.
If the indicator stem base on your BMW Motorrad has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. We've made this style of part before and can usually print yours without drama.
Why these break
Indicator stems snap at the base in tip-overs. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — twenty years on, there's no margin left in it.
How we reproduce them
This is a quick job on our end — we take dimensions from your old part, adjust for print tolerances, and run a small batch so you have spares for next time.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | BMW Motorrad |
|---|---|
| Vehicle / equipment type | Motorcycle |
| Common failure mode | Indicator stems snap at the base in tip-overs |
| Typical use case | Direct replacement for the original indicator stem base on the BMW Motorrad. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | TPU |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $25 |
| Expected lifespan | 4–6 years in cabin conditions |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
