Roller Blind Chain Cog
Chain-drive cogs and clutch parts for roller blinds — the little part that writes off a whole blind. Matched to your chain pitch.
Chain-drive cogs and clutch parts for roller blinds — the little part that writes off a whole blind. Matched to your chain pitch.
Common failure: Cog teeth strip so the chain slips and the blind won't hold.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Common roller blind mechanisms |
|---|---|
| Common failure mode | Cog teeth strip so the chain slips and the blind won't hold |
| Typical use case | Replacement part for common roller blind mechanisms. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $28 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
