Primus Lantern Base
We keep getting asked about this one — the lantern base is one of those Primus parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
We keep getting asked about this one — the lantern base is one of those Primus parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
Why these break
Lantern bases crack when dropped in the dark. Vibration and repeated use do the damage: thousands of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in ASA. ASA is the UV-stable cousin of ABS — it holds its colour and strength through years of Australian sun where the original plastic went chalky and brittle.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Primus |
|---|---|
| Vehicle / equipment type | Camping gear |
| Common failure mode | Lantern bases crack when dropped in the dark |
| Typical use case | Replacement part for camping gear. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $28 |
| Expected lifespan | 4–6 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
