Whirlpool Dryer Timer Knob
Whirlpool made solid gear, but the small plastics are always the first to go — and the dryer timer knob is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Whirlpool made solid gear, but the small plastics are always the first to go — and the dryer timer knob is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Why these break
Timer knob cracks and slips on the shaft. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — twenty years on, there's no margin left in it.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Whirlpool |
|---|---|
| Vehicle / equipment type | Household appliance |
| Common failure mode | Timer knob cracks and slips on the shaft |
| Typical use case | Direct replacement for the original dryer timer knob on the Whirlpool. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $10 – $22 |
| Expected lifespan | 5+ years indoors |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
