Kedron Entry Grab Handle
We keep getting asked about this one — the entry grab handle is one of those Kedron parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
We keep getting asked about this one — the entry grab handle is one of those Kedron parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
Why these break
Entry handles crack at the screw bosses. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — twenty years on, there's no margin left in it.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in ASA. ASA is the UV-stable cousin of ABS — it holds its colour and strength through years of Australian sun where the original plastic went chalky and brittle.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Kedron |
|---|---|
| Vehicle / equipment type | Caravan / pop-top |
| Common failure mode | Entry handles crack at the screw bosses |
| Typical use case | Direct replacement for the original entry grab handle on the Kedron. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | PA-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $18 – $40 |
| Expected lifespan | 3–5 years of Australian UV |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
