Paslode Case Hinge
Paslode made solid gear, but the small plastics are always the first to go — and the case hinge is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Paslode made solid gear, but the small plastics are always the first to go — and the case hinge is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Case hinges crack and lids come away. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in PA-CF. Carbon-fibre nylon is the strongest material we run — it goes into parts that carry real load, where a lesser plastic would be the next thing to break.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Paslode |
|---|---|
| Vehicle / equipment type | Power tool |
| Common failure mode | Case hinges crack and lids come away |
| Typical use case | Direct replacement for the original case hinge on the Paslode. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $28 |
| Expected lifespan | 5+ years under load |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
