Vacuum Cleaner Hose Latch
Hose connector latch tabs for barrel vacuums. A small spring-loaded part that kills otherwise good machines.
Hose connector latch tabs for barrel vacuums. A small spring-loaded part that kills otherwise good machines.
Common failure: Latch tab wears and the hose pops out mid-clean.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Most barrel vacuum brands |
|---|---|
| Common failure mode | Latch tab wears and the hose pops out mid-clean |
| Typical use case | Replacement part for most barrel vacuum brands. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $28 |
| Expected lifespan | 2–4 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
