Milwaukee Packout Replacement Latch
Stack latches and feet for the Packout system, printed in carbon-fibre nylon. Also custom Packout-compatible mounts and inserts.
Stack latches and feet for the Packout system, printed in carbon-fibre nylon. Also custom Packout-compatible mounts and inserts.
Common failure: Stack latches crack under load or in the cold.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Milwaukee |
|---|---|
| Model | Packout system |
| Common failure mode | Stack latches crack under load or in the cold |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $15 – $32 |
| Expected lifespan | 2–4 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
